Any plumbing, including a bath, eventually begins to darken, losing its attractiveness. This is due to the fact that in a durable and durable, at first glance, enamel coating is filled with dirt and rust, which is extremely difficult to remove. Therefore, in order to whiten the bath at home, it will be necessary to make efforts, resorting to the help of improvised means that can effectively cope with this problem.
Bath whitening at home
If the bathtub is old enough and you do not really feel sorry for the coating that was already cracked with time, then the can be whitened with any abrasive powder intended for sanitary ware .First, the surface of the bath should be moistened, then fill it with the selected product and evenly distribute it along the enamel with a sponge. Approximately 10-15 minutes should be armed with a metal brush or sponge with a very hard surface, with which you need to properly treat the bath. Usually, after such a procedure, the remnants of dirt and rust are remov
However, if the pollution is strong enough, then the factory facilities for bath cleaning in this case will not help. Solve the problem in this case allows the folk method, which consists in the self-preparation of whitening paste. To do this, mix 2 tablespoons of regular soda with the same amount of soda ash, vinegar and powder bleach. The resulting gruel should be evenly distributed over the bath surface, especially carefully treating the most contaminated areas, and then after 10-15 minutes rinse with water. As a rule, the results of such cleaning exceed all expectations, and your bath will shine white in the next few months, without requiring additional care.